InovaPrint wash can be used to wash printable ceramic-filled resins. Hp-Dent recommends the same procedure as all other resins:
1) “Pre-wash” the printed object, preferably in an ultrasonic bath, with InovaPrint wash at 30C°/86F° for 10 minutes
2) “Finish wash” the printed object in a second ultrasonic bath/bowl with InovaPrint wash at 30C°/86F° for further 10 minutes
3) Rinse well with water to eliminate product on surface
4) Continue with the curing process as per IFU of the producer of resin.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article